Side view (Example model V1340)

• The tank should be positioned so that the fill point is easily accessible.
• The entire base of the tank should be supported, flat and solid.
• The tank support structure should be able to with stand the load of the tank when fully fitted for a long period of time. Taking into account that 1 litre of liquid is approximately equal to 1 Kg.
• The base area should be smooth, free from debris and sharp objects.
• The tank when full will expand, so there should be a minimum gap left around the whole tank of 150mm.
• The outlet supplied fitted with the tank is a 1” female bsp fitting and is set at the correct torque setting.
• The tank should be protected against strong wind, especially when empty.
• All pipe work should be supported to reduce stress on the joints.
• The tanks are designed for static use only.
• For use with the following fuels:-
  • Diesel
  • Kerosene
  • Paraffin
• The tanks are not suitable for drinking water.
• The tank should be clearly labelled to identify the contents for other people’s safety.